自动拧螺丝机
产品详情
-
产品概述 Overview
DZ47 接线柱自动装配机、墙壁开关接线柱自动装配机、C65 接线柱自动装配机、铜粒接线柱自动装配机、NC 接线柱自动装配机
DZ47 terminal automatic assembling machine, wall switch terminal automatic assembling machine,C65 terminal automatic assembling machine,Automatic assembling machine for copper grain terminal,automatic assembling machine for NC terminal
产品特点 Product features
◆ 具有自动供料系统,料满自动暂停,无料自动启动。
It has an automatic feeding system, which automatically stops when the material is full and starts when there is no material.
◆ 间歇分割器都配有保护器,很好的保护了机器由于故障而造成损坏。
The intermittent dividers are equipped with protectors to protect the machine from damage due to failure.
◆ 具有筛料功能,将没有拧到位的接线柱与没有螺丝的接线柱自动筛出。
It has the screening function to automatically screen out the terminal without screw and the terminal without screw.
◆ 具有自动解料功能,将不好接线柱自动解体。
It has the function of automatic material removal, which can automatically disassemble the bad terminal.
◆ 电动螺丝刀,有扭力保护功能,减少螺纹损坏。
Electric screwdriver with torque protection function to reduce thread damage.
◆ 设备采用了机械结构,增强了设备零部件的使用寿命。
The equipment adopts mechanical structure to enhance the service life of equipment parts.
◆ 设备采用智能变频系统,更省电。
The equipment adopts intelligent frequency conversion system to save power.
◆ 日产量(按8 小时)能达到6 万只左右,在行业内具有地位。
The daily output (8 hours) can reach about 60000, which has a leading position in the industry.
◆ 速度快,运行稳定;操作简单,无需培训。
High speed and stable operation; Simple operation without training.
技术参数 Technical parameter
◆ 电动机功率:750W
Motor power: 750W
◆ 电机动作节拍:120(次/ 分钟)
Motor action beat: 120 times / minute
◆ 电压:AC220V
Voltage: AC220V
◆ 电流:3.5A
Current: 3.5A
◆ 外形尺寸(mm):700*1300*1300
Overall dimension (mm): 700 * 1300 * 1300
◆ 总重:300KG
Total weight: 300kg
NC 接线柱
NC terminal post
C65 接线柱
C65 terminal post
C 扣接线柱
C-buckle terminal post
DZ47(C45) 接线柱
DZ47(C45) terminal post
墙壁开关接线柱
Wall switch terminal
铜粒
Shot copper